承泰电子仪器（回收）有限公司
销售/租赁/维修/回收网络分析仪
便宜销售网络分析仪/高价现金回收网络分析仪
哪里便宜销售网络分析仪，承泰电子仪器
哪里现金回收网络分析仪，承泰电子仪器
联系人：李威/ 手机:13725838534
联系人：陈斌/ 手机:13538338546
传真：0769-82074556 E-mail:778918362@qq.com
地址:广东省东莞市塘厦镇省水电三局30栋
========================================================
提示：如果您找不到联系方式，请百度一下：承泰电子仪器。
========================================================
技术指标
Analyzer Measurement modes Transmission(dB),return loss(dB),SWR
(linearSWR),optiona group delay(ns),power(dBm)precision return loss(dB) and
optionaldistance-to-fault
Dynamic range -55 to +16dBm,autozeroing with DC detection
Inputs Three,two standard inputs,A and B,with optionathird reference channel,R
(Option 5)
Display channels Two channels are used to selec and simultaneouslydisplay any
two inputs fromA,B,or R.The inputs can also be displayed asratios A/R or B/R.
Scale resolution 0.1 to 10dB(m) per division in 0.1dB steps
Cursor functions Searches for trace maximum,minimum,dB level,dBbandwidth,next
marker and active marker
Averaging 2,4,8,16,32,64,128,or 256
Limit lines Two limit ines,either single value or multilevel segmented,for each
trace.Segmented lines may be made from up to 10individually editable segments.
Auto-zero Performs an AC modulation cycle and lowlevel calibration during
sweeper ratrace
Save/Recall Thirteen sets of front panel set-ups andthirteen sets of trace
memory can be stored in non-volatile instrument memory.
Trace mask A swept frequency measurement can be storedto a graticule trace mask
for visual comparison to later measurements.
Disk drive Built-in 3.5 inch,1.44MB floppy disk drive
Autosave Automatically increments the trace datafile name and reference number
during successive data storage operationsto the DOS disk
Source Frequency range 1Mhz to 110GHz,model dependent
Alternate sweep Sweep alternately between frequenc yrangesset differently for
channel 1 and channel 2
CW Provides single frequency output(both channelsturned off)
Frequency resolution Rf Model(54107A,54109A,54111A):10kHz,Microwavemodels:100khz
Output power Maximum guaranteed levelled output poweris model dependent.
Reverse power protection UP to 5 Watts.Limited to 1 Watt with attenuatoroption
Appli-
cation function Min/Max hold Save the minimum and maximum values of
successivesweeps or the combination of the two
Cursor functions Automatic cursor seach updates the bandwidth,minimum,ormaximum
levels of the displayed trace.
Compression test automation Determines the gain compression point overthe
operating freqeuncy range of an ampliffier by successively incrementingthe
source power and measuring the amount of compression until a preset"X"dBlimit is
exceeded.
Self test Performs a self test every time power isapplied or when SELF TEST
pushbutton is pressed.If an error is detected,adiagnostic code
appears,identifying the cause and location of the error.
General Operating temperature 0°to 50℃
Power 48 to 400Hz,300VA
Mass 18kg(39lb.)
Printer Parallel printer interface is compatiblewith the Canon BJ30,Bj200e,and
most Epson FX-compatible printers.
Transit case Hard shell case with custom foam inserts,PN:760-183
EMC Meets European community requirements forCE marking
订货信息 Model/Order No. Name
Option 1 Options
Rack mounting with slides
Option 2 70dB RF step attenuator
Option 2A 70dB,20Ghz MW step attenuator
Option 2B 70dB,26.5GHz MW step attenuator
Option 2C 70dB,40GHz MW step attenuator
Option 2D 70dB,50GHz MW step attenuator
Option 4 75Ω source output(available to 3.0GHz)
Option 5 Add reference channel
Option 6 Add external levelling
Option 7 Internal distance-to-fault software
Option 8 Internal relative group delay software
Option 12 Add front panel cover
Option 13 Add front mounted handles
Option 16 +15V DC supply for millimeter wave source modules(availablewith<20GHz
models only)
Option 25 Maintenance manual
Option 26 Extra operation and GPIB programming manual
Option 33 Canon printer
长期专业销售、租赁、维修、计量.回收高频二手仪器!!欢迎来电
!本公司长年回收，销售，租赁二手进口仪器。